Thermal Analysis of Gray Cast Iron by Interpretation of Cooling Curves
Arda Çetin, M.Sc.,2002
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Investigation of Cast to Size Mold Making Techniques
by Shaw Process
Fatih Güner, M.Sc., 2002
Supervisor: Prof. Dr. Ekrem Selçuk

Aluminyum Bakır (Al-4%Cu) Alaşımlarının
Yönlü Katılaşması ve Deneysel Modellemesi
Kamil Tüzünalp, Ph.D., 2002
Supervisors: Assoc. Prof. Dr. Ali Kalkanlı
Assoc. Prof. Dr. Tamer Özdemir (Gazi Üniversitesi)

Characterization of Rapidly Solidified Al-Fe-V-Si Alloy Powders
Burç Aral, M.Sc., 2001
Supervisor: Ali Kalkanlı

Al-Si and Al-Fe-V-Si Alloy Slug Production
for Thixocasting of Aluminum Car Parts
Özgür Kemal Kapusuz, M.Sc., 2001
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Production of TiB2Al2O3 Reinforced MMC
M.Sc., 1999
Supervisor:Prof. Dr. Naci Sevinç
Co-Supervisor:Assoc. Prof. Dr. Ali Kalkanlı

Production and Characterization of Aluminum Matrix
TiC Composites
by Vacuum Sintering
Rıza Seymen, M.Sc., 1998
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

As-cast Property Determination of Gray Cast Iron
by Thermal Analysis
İlknur Uysal, M.Sc., 1998
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Vermicular Graphite Cast Iron
Figen Haraççı, M.Sc., 1998
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

S.G. Iron Solidification and Its Thermal Analysis
Funda Şenöz, M.Sc., 1998
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Rapid Solidification of Al-V-Fe-Si Alloy by Melt Spinning
Suat Angı, M.Sc., 1997
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Sintering Studies of Ba and Sr-hekzaferrites,
Ertuğrul Çiftçi, M.Sc.,
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

In Situ Production of Al-TiC Composite,
Tufan Sezenöz, M.Sc., 1997
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı
Co-Supervisor: Assoc. Prof. Dr. Filiz Sarıoğlu

 

Development of a Superhard Cast Iron
Alloy For Wear and Crushing Applications
Burak Kozak, M.Sc.,
Supervisor: Prof. Dr. Ekrem Selçuk
Co-Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Investigation and Development of
Production Techniques of Superhard
Second Phase Strong Cast Iron Alloys
M. Emre Canat, M.Sc.,
Supervisor: Prof. Dr. Ekrem Selçuk

Casting Simulation of Parts by Novacast Code
Hikmet Aksoy, M.Sc.
Supervisor:Assoc. Prof. Dr. Ali Kalkanlı

Production of AAl-TiB2 Reinforced Aluminum Matrix Composite
Ahmad Changizi, M.Sc.
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı
Co-Supervisor: Prof. Dr. Naci Sevinç

Thermal Analysis and Production of Aluminum Composites
H. Erol. İslamoğlu, M.Sc.
Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Assessment of Mechanical Properties of Cast Irons
Using a Taguchi Based Approach
Engin Aksu, M.Sc.
Supervisor: Prof. Dr. Filiz Sarıoğlu
Co-Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Production of TiB2 Reinforced Aluminum Matrix Composites
Aziz Kurtoğlu, M.Sc.
Supervisor: Prof. Dr. Naci Sevinç
Co-Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Assessment of Mechanical Properties of Spray Deposited
High Temperature Aluminum Alloys
S. Baran Göksu, M.Sc.
Supervisor: Prof. Dr. Filiz Sarıoğlu
Co-Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

Impact Toughness of Laminated Composites
Dinçer Dinç, M.Sc.
Supervisor: Prof. Dr. Filiz Sarıoğlu
Co-Supervisor: Assoc. Prof. Dr. Ali Kalkanlı

 

Djulgerov N, Ali Kalkanlı, Alpay Ankara, N. Stoichev, S. Yaneva,
"Mechanical Properties of Compacted Al-Fe-V-Si Powder Metallurgical Alloys",
Mechanical Engineering Technologies, pp.633-634, Sofia, Bulgaria, June 2001

Svetlana Yaneva, Kostadin Petrov, Tomislav Markov, Ali Kalkanlı, Bilgehan Ögel,
"Phase Transitions in Rapidly Solidified Thermally Treated Al-Fe-V-Si Alloys",
Mechanical Enginnering Technologies, pp. 564-566, Sofia, Bulgaria, June 2001

Ali Kalkanlı, "Powder Metallurgical Techniques for Tool Steels", International Seminar
on Tool Steels for Moulds and Dies, pp. 260-270, Istanbul, October 2000

Ali Kalkanlı, "Takım Çeliklerin Üretiminde Toz Metalurjisi Yöntemleri ve Püskürtme Biriktirme Uygulaması", Metal Dünyası, Sayı: 91, Yıl: 9, Sayfa 12-18, Aralık 2000

Ali Kalkanlı and Suat Angı, "Effect of Cooling Rate on Microstructure and High Temperature Stability of Rapidly Solidified Al-Fe-V-Si Alloys", Powder Metallurgy,
Vol. 42, No. 4, pp. 359-365,1999

Ali Kalkanlı, "Hızlı Katılaşmış ve Hava Atomizasyonu ile Üretilmiş Al-Fe-V-Si Alaşım Toz ve Puslu Malzemelerin Katılaşma Sonrası ve Sinter Sonrası İçyapı Karakterizasyonu", 2. Uluslararası Katılımlı Ulusal Toz Metalurjisi Konferansı, Ankara, Eylül 1999

Ali Kalkanlı, E. Çiftçi, "Sr-Hekzaferrite Toz ve Mıknatıs Üretim Sürecinde Azotun Etkisi", 2. Uluslararası Katılımlı Ulusal Toz Metalurjisi Konferansı, Ankara, Eylül 1999

Ali Kalkanlı, John V. Wood and Nicholas Braithwaite, "Melt Instabilities and the Effect of SurfaceTension on Preventing Edge Segragations in Melt Overflow Alloy Strip Casting",
ISIJ International, Vol 38, No. 2, pp. 142-148, 1998

Ali Kalkanlı, "Püskürtme Şekillendirme (Spray Forming)", Toz Metalurji Derneği Haber Bülteni,
Yıl 2, Sayı 6, Nisan 1998

S. Angi, Ali Kalkanlı, "Microstructure and High Temperature Phase Studies of Rapidly Solidified
Al-Fe-V-Si Alloys", Uluslararsı Katılımlı 13. Ulusal Elektron Mikroskopisi Kongresi,
pp. 839-843, Eylül 1997

Ali Kalkanlı, T. Sezenöz, F. Sarioğlu, "Microstructural Examination of In-Situ Produced MMC's", Uluslararasi Katılımlı 13. Ulusal Elektron Mikroskopisi Kongresi, pp. 684-689, Eylül 1997

Ali Kalkanlı, "Microstructures of Rapidly Solidified Melt Extracted Metal Fibres"
Uluslararası Katılımlı 13. Ulusal Elektron Mikroskopi Kongresi, pp. 811-816, Eylül 1997

 Ahmet Coşkun, M. Vedat Akdeniz, Ali Kalkanlı, "Çift Merdane Doğrudan ve Sürekli Döküm Teknolojileri", Metalurji, TMMOB Metalurji Mühendisleri Odası Dergisi, sayfa 45-49, Ekim 1996

N. Koç, Ali Kalkanlı, "Powder Metallurgy and Ceramic Research at Metallurgical And Materials Engineering Department of METU", 1. Ulusal Toz Metalurjisi Konferansı,
Gazi Üniversitesi, Ankara, pp. 679-688, Eylül 1996

Filiz Sarıoğlu and Ali Kalkanlı, "Microstructural Characterization of Squeeze Cast Al-TiCp Composite", Turkish Journal of Medical Sciences,
pp. 170-71, 1995

Ali Kalkanlı, "Mechanical Behaviour of Metals at High Temperature", NATO ASI Seminar,
Portugal, 1995

Ali Kalkanlı, Filiz Sarıoğlu, "Microstructural Asessment of Al-SiCp Composite Produced by
Squeeze Casting", Turkish Journal of Medical Sciences,
pp. 168-69, 1995

E.Selçuk , "Development of Fiber Glass Reinforced Aluminium Alloys" ESDA 2nd Biennial Joint Conference on Engineering Systems Design and Analyses. Vol.64.2, pp.181-186, 1994


E.Selçuk, "Improvement in the Impact Toughness of Aluminium Fiber Glass Composites" CIM 33rd Annual Conference of Metallurgist, Toronto Canada, 1994


E.Selçuk, H.Aygün, "Why Radiographic NDT Testing Gives False Alarm?", EUROMAT'94,
pp.245-250, 1994


E.Selçuk, H. Kalebozan, "Interfacial Structure of Candidate Metal-Ceramic Composites" EUROMAT'94, pp.949-953, 1994


E.Selçuk, H. Kalebozan, "Measurements of Interfacial Energy Between Liquid Copper and Various Ceramic Substrates" J.High Temperatures-High Pressures, Vol.26, pp.149-156, 1994


Ali Kalkanlı, David Grant, John Wood, Ekrem Selçuk "The effect of surface active elements on the liquid vapour surface tension of liquid 304 stainless steel", High Temperatures - High Pressures, Vol.25, pp.435-442, 1993


Ali Kalkanli, "The effect of surface active elements on the liquid vapour surface tension of liquid 304 stainless steel", 13th European Conference on thermophysical properties, Lisboa, Portugal, 30 August -3 September 1993

A. Kalkanli, J.V. Wood and N. Braithwaite, "Melt overflow of 304 stainless steel", Rapid solidification and associated technologies, Nottingham, United Kingdom, 1992


E.Selçuk, "Centrifugal Casting of Steel-Babbitt Composite Bearings", 30th Annual Conference of Metallurgist in Ottowa CANADA, paper No: 44. 2 August 1991


E.Selçuk, "Rebirth of Zn-Al Alloys", Ibid paper no: 44.4


E.Selçuk, "Energy Conservation in Steel Industry" 1st International Conference, Energy, Economy, Ecology, Baku Azerbaycan. August 1991


A. Kalkanli, J.V.Wood and M.J.Gibbs, "Production and assesment of direct cast soft magnetic crystalline alloy strip", Journal of Magnetism and Magnetic Materials 83, p.395-398, 1990

Ali Kalkanlı, J. V. Wood, N. Braithwaite, "Modelling the Meltoverflow Process
of 304 Stainless Steel", 7th International Conference on Rapidly Quenched Materials,
Stockholm, August 1990
middle east technical university department of metallurgical and materials engineering
İnönü Bulvarı 06531 ANKARA TURKEY